HDPE Pipes

Made from polyethylene, HDPE are known to be a cost effective solution for a wide range of challenges in industrial, muncipal, duct and agricultural applications.

HDPE is an excellent piping solution used above ground, on the surface or buried. Polyethylene pipes can carry potable water, wastewater, slurries, chemicals, hazardous wastes, and compressed gases.

Permanently Lubricated HDPE

PLB HDPE are made from virgin, UV grade HDPE materials and are used for deployment of Optic Fiber and Copper Cables. The ducts has excellent resistance to enviromental hazards and mechanical load. The ducts consist of two concentric layers, the outer layer being HDPE; co-extruded with an inner layer of solid permanent lubricant to reduce the Internal Co-efficient of Friction (ICF).

GI Steel Tubes/ Pipes

We offer a range starting from 15 mm to 400 mm of square and rectangular hollow section. Thickness is 2 mm to 10 mm. The square section’s range starts from 19x19mm to 220x220mm. The rectangular section on the other hand starts from 50x25mm to 172x92mm.

uPVC Pipes & Fittings

Our uPVC range of products is manufactured using the best sourced raw material and is lead free. As a result, uPVC is the most convenient medium used for cold water transportation and considered economic and easy to install.

cPVC Pipes & Fittings

Pipes are manufactured in Copper Tube size [CTS] from ½ “to 2” with two different standard dimensional ratios. SDR-11 and SDR-13.5 are made from CPVC compound and are produced as per ASTM D 2846 and IS 15778 and ASTM F 442. Apart from having the same physical properties, SDR-11 and SDR-13.5 have different wall thickness and therefore, at any given temperature, have different pressure rating.

SWR Pipes & Fittings

SWR (Soil, Waste and Rain) Pipes and Fittings comes with Leak proof for better fitment. They are an ideal solution for ventilation, rain water system and, soil and waste discharge systems.